Posts Tagged ‘ MIL-COTS ’

Five new MIL-COTS Power Components

June 14, 2017
By
Five new MIL-COTS Power Components

Today we announced four new MIL-COTS (M-Grade) DC-DC Converter Modules (DCMs) and a new MFM Filter.

Read more »

Webinar rebroadcast: Meeting DC-DC Power System Requirements in Defense Applications

June 1, 2017
By
Webinar rebroadcast: Meeting DC-DC Power System Requirements in Defense Applications

The recent popular webinar covering DC-DC design for defense applications, presented by Vamshi Domudala, System Application Engineer at Vicor

Read more »

New MIL-COTS DCMs and Input Filters Meet Advanced SWaP-C Requirements

May 2, 2017
By
New MIL-COTS DCMs and Input Filters Meet Advanced SWaP-C Requirements

Today we announced two new MIL-COTS (M-Grade) DC-DC Converter Modules (DCMs) in VIA packaging, with 270V (160 – 420V) input voltage range

Read more »

Webinar Explains How to Meet DC-DC Power System Requirements in Defense Applications

April 5, 2017
By
Webinar Explains How to Meet DC-DC Power System Requirements in Defense Applications

In recent research that we conducted, engineers working in the defense sector were more likely to prioritize performance, to struggle to meet project timescales

Read more »

Dave Berry Explains the Need for Holdup in COTS Journal

October 23, 2014
By
Dave Berry Explains the Need for Holdup in COTS Journal

COTS Journal has featured an article by Dave Berry, applications engineer at Vicor, explaining the requirements for holdup in COTS applications and how they can be met.

Read more »

Powering a Homecoming in 90 Days: Part 2

This is the second post in a series that describes how Vicor Custom Power developed a solution for the Navy to replace an obsolete power supply, despite having no specifications for the part that needed replacement. If you’ve not read it yet, read the first post here. Our task began with an initial architecture that would rectify the input AC power and develop the necessary voltage and power to the output.  We knew right away that this would take a fair amount of physical space, plus we had an estimate...

Read more »

The New MIL-COTS PRM® Regulator

August 28, 2014
By
The New MIL-COTS PRM® Regulator

The new Vicor PRM regulator (MPRM48NF480M500A00) is based on our VI Chip® platform, and provides power density of 106W/cm3 and efficiency of 97.7%. The new regulator delivers 500W output power in the same package size as our earlier generation 120W MIL-COTS PRMs. For applications such as unmanned aerial vehicles (UAVs) this fourfold increase in power density can provide a game-changing advantage. Designers of military systems are acutely focused on achieving aggressive size, weight and power (SWAP) profiles that will give military vehicles greater agility to fulfill increasingly ambitious missions....

Read more »

Find out more about our Cool-Power Buck Regulators DCMs - A better Brick subscribe to vicor newsletter Contact Us

Get Connected